Stoddards Aircraft

Stoddards Aircraft - Univair replacement ribs for Piper aircraft. J-3 thru PA-25. These ribs are made of stamped aluminum and are much stronger than the original Piper rib. They can be purchased individually or in kits for specific wings.

AD42-BSLF pop rivits are used in place of rib stitching. (YES!!). Parts & Stc. FAA/PMA/STC'D $POR F A Dodge Front and Rear Heat Shrouds for PA-18, made of Aluminum, 2 halves (Top Half and Bottom Half) held together with Worm Gear Clamps.

Stoddards Aircraft

Allows fast and easy removal to inspect Exhaust Stacks, without damaging (cracking) the shrouds. Front Shroud and Stc  FAA/PMA/STC'D PA-18 $100.00 ea Rear Shroud & Stc  FAA/PMA/STC'D PA-18 $175.00 ea When flying in Alaska it does not take long to realize that all airplanes

About Sic Naics Business Data

are not equal. Some airplanes perform better than others like airplanes. The difference sometimes is performance modifications. Whether you are looking to shorten your landings and takeoffs or maybe just improve your over all performance call stoddard's to see where to start.

We are currently working with several Alaskan Facilities that offer S.T.C. installation & modifications to help improve performance & enhance light aircraft maneuverability. Some of the main competitors to "Stoddards Aircraft Parts Center" in SIC Code 4581 - Airports, Flying Fields, and Airport Terminal Services and NAICS Code 488190 - Other Support Activities for Air Transportation are the following:

Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading. SICCODE.com compiles comprehensive business data and executive contact leads for businesses in the USA and Canada.

Order a list of companies within SIC Code 4581 - Airports, Flying Fields, and Airport Terminal Services and NAICS Code 488190 - Other Support Activities for Air Transportation for marketing (postal mailing, telemarketing, executive emailing) or analytics-use.

Business Overview

Our data analysts are standing by to assist in your list setup and target marketing. We are currently making a Fiberglass Nose Cowl that splits in two pieces, and fits experimental/homebuilt PA 12/14/18/20/22 type cowling. It's being made

with or without the oil cooler scoop. Its l lb lighter than the Aluminum and reinforced with Carbon Fiber extra strength. Parts only needs 337. NOT FAA APPROVED EXPERIMENTAL $495.00 HOMEBUILD ONLY Airglass Engineering Cargo Pod/Belly Tank  Fits PA-18 land plane.

Has 18 gal fuel capacity in front of pod and rear of pod has door for 50 lb cargo capacity. Pod can be removed in 15 minutes after initial installation. PA-18 Sea Plane and PA-12 models

available nearby future. Prices range from $2200.00 up depending on parts needed. (fuel pump and fuel extra lines). Parts & Stc. FAA/PMA/STC'D $POR "Stoddards Aircraft Parts Center" of Anchorage, AK 99501 operates primarily in SIC Code 4581 - Airports, Flying Fields, and Airport Terminal Services and NAICS Code 488190 - Other Support Activities for Air Transportation.

Stoddards Aircraft Parts Center is a small-sized business with low revenue, that is well-established in its industry. F A Dodge heat robber kit. Robs heat from exhaust shroud and put it in cabin PA 18 and some other cubs with some modification Includes

Arens control and diverter box. Fits PA 18. Fits other cubs with some modification Parts & Stc   FAA/PMA/STC'D $225.00 Univair has 180HP Lycoming engine conversion for Stinson 108-1 thru 108-3. And a 200HP Lycoming engine conversion for Stinson 108-3.

Aircraft needs new mufflers & heat shrouds, new oil cooler and various other parts. Some aircraft require larger fuel lines. Parts & Stc. FAA/PMA/STC'D $POR Would you like to order a list of companies similar to

"Stoddards Aircraft Parts Center"? F A Dodge long gear step. Approx 38 long. Fit between front & rear legacy of PA-18 landing gear to help make fueling acft easier and also allow easier entrance to aircraft.

Aluminum. Need 1ea pr acft. Step & Stc. FAA/PMA/STC'D PA-18 $100.00 ea Univair has heavy duty PA-18 landing gear legs available. They were developed for the rugged use that Alaskan Guides and Bush Pilots put this

aircraft thru. The axles can be had in 1 1/4 and 1 1/2 size. Both size axles are made of heavier and stronger material, and the main gear legs are made with heavier tubing and have

reinforcements and gussets located at the weak points to help prevent breakage. These gear are great for Big Tires & Skis. Parts & Stc. FAA/PMA/STC'D $POR Stoddard also had some Auxiliary Fuel Tanks for cub style aircraft.

These were sold to another Aircraft business in 1973. This business has since shut down so the Auxiliary Fuel Tanks or the paper work (Stcs) for fuel tanks are no longer available. Get Data From 15 Million Businesses

Contact 40 Million Executives We also carry Landis Fiberglass Skiis, Aluminum Aero Skis, Northern Companion pre-heaters, Red Dragon pre-heaters, Engine covers, wing covers, tail covers, (in mesh or nylon) tail skiis, cold weather bungees, to help make winter

flying easier. Odyssey Light Weight Batteries. Niagara rear mounted Oil Radiators, and several Light Weight Starters. (Batteries, Starters, and Oil Radiators and Skiis are all PMA'd, but may need STC's for approved installations). F A Dodge has many more modifications and Stcs.

Too many to list here. Strong example, Cessna folding and removable seats, super cub folding seats. 30 gal wing tanks for cubs. as well as many misc parts. Call for more information. Univair has 180HP Lycoming engine conversion for PA-22 aircraft.

PA-22 must be converted to taildrager. Conversion uses new Dynafocal engine mount. Cowl must be modified. 3 different types of kits are offered so that's a custom installation is easy to choose. (Lycoming Engine is also available

for this installation). Parts & Stc. FAA/PMA/STC'D $POR

stoddards aircraft anchorage, stoddards anchorage, stoddards aircraft parts, stoddard parts, stoddards aircraft parts center, stoddard international, stoddard hamilton aircraft, stoddards 356